MAEKER
A 3D printer mid-print in the workshop

Service

3D printing & fabrication

Send an STL, STEP file, or a sketch. We print in PLA, PETG, and resin, and can help with the design if you don’t have a file yet.

  • ₦15,000, materials-dependentStarting price
  • Quote in 24 hours · parts from 3 working daysLead time
  • Fixed quoteBefore work begins

Priced per part, not per tier — material by weight against a ₦15,000 minimum. The published rates are on the pricing page. See the tiers

Materials

What we can print it in.

The shelf, one material at a time. Tell us what the part has to survive and we will tell you which one to use.

How an order runs

From a file to a part in your hand.

  1. 01

    Send us the file

    An STL or STEP file, or a sketch and a photo. If you have no file yet, we help with the design.

  2. 02

    A written quote

    Within 24 hours

    Material by weight plus time on the machine, with the lead time and the finish you chose.

  3. 03

    We print it

    From 2 working days

    On our own machines in Jahi, in the material the part has to survive in.

  4. 04

    We finish it

    Sanded & deburred, vapour smoothed, primed & painted or assembled & hardware, or as printed.

  5. 05

    You collect or we ship

    Collect from the workshop, courier within Abuja, or shipping nationwide.

The workshop

Our machines, in Jahi.

  • A Bambu Lab H2S standing open beside an X1 Carbon with its filament changer on top
    The machines
  • A red helmet printed in one piece, standing on the build plate
    Off the plate
  • The toolhead moving over a black part being printed on tree supports
    The business end

What it costs

Price your part before you send it.

The workshop’s own arithmetic, against the rates we actually charge. Weight and print time are the two numbers at the top of any slicer; if you have neither, pick what feels close and we will correct it in the quote.

Material

The everyday workhorse. Crisp detail, the widest colour range, and the cheapest way to hold a real part.

How many

1

5% off from 5

Finish

Estimated total

₦21,700

about 2 working days

PLA filament120 g × ₦95/g × 1.12 waste
₦12,768
Machine time6 h × ₦900/h
₦5,400
Setupfile prep, plating, first-article check
₦3,500
Send the file for a quote

An estimate, not a quote. Weight and machine time come off the slicer once we have your file, and the written quote we send back is the number you pay.

Scope

What lands, and what it runs on.

DeliverablesMAEK-FAB-04
  1. 0124-hour quote
  2. 02PLA / PETG / resin
  3. 03Design assistance
  4. 04Small-batch runs
  5. 05Nationwide shipping

Fixed quote before work begins

Built on3 components
  • FDMFilament printing — PLA, PETG, ABS and TPU. The everyday process for functional parts, jigs and enclosures.
  • SLA/resinResin cured layer by layer in light, holding detail no filament can reach.
  • CNC finishingMachining, sanding and finishing after the print, so the part arrives ready to use rather than raw off the bed.

Ready to scope it?

Tell us what you’re building.

A sentence or two is enough. We reply within 1 business day.

Start a project
  • Mon–Fri, 9:00–18:00 WAT
  • No cost, no obligation